Senninger Pivot
Application:
Senninger’s low pressure End Spray is designed for use at the end of a machine. It can help irrigate the area between the last sprinkler and the end gun. The low angle design resists the effects of wind and the large orifice resists clogging.
Features:
- No moving parts for longer product life
- Provides a 180º distribution with good uniformity over large area to help reduce compaction and run-off
- End Spray must be installed on a 1" F NPT connection
- One-year warranty on materials and workmanship
Related Products
Senninger XI-wobbler
Features:
- Low pressure operation saves energy: 10 to 15 psi (0.69 to 1.03 bar)
- Four different deflector models, including top-of-pipe, based on trajectory and droplet size
- UP3 Nozzle is easy to remove for cleaning or changing
- Two-year warranty on materials, workmanship and performance
Senninger Pressure Regulator 2
Features:
- Senninger regulators maintain a constant preset outlet pressure with varying inlet pressures, which alleviates pressure differences that can cause an applicator’s area of coverage to change.
- 100% water tested for accuracy at Senninger’s in-house facilities
- Very low hysteresis and friction loss
- Can be installed above or below ground
- Two-year warranty on workmanship, materials and performance
Senninger Superspray
Features:
- Twenty-two easily changeable snap-in pads are available
- No moving parts for longer product life
- Can be mounted on top-of-pipe or on hose drops
- Two-year warranty on materials, workmanship and performance
- Easy-change UP3 nozzle - simply pinch and pull to remove and place and click to reinstall, are easily identified with color-coding, and are warranted to maintain their correct orifice size for five years