- AC 240 Volt- Commercial- Domestic Controllers
Hunter PRO-C modular irrigation control
Code : Pro-C
Hunter modular irrigation controller 3 to 15 stations, indoor and outdoor mounts, 3 independent programs, 4 start times per program, station run upto 6 hrs, easy retrieve memory, one touch manual start and advance, rain sensor bypass, programmable rain delay, quick check, non-volatile memory, automatic short circuit protection, seasonal adjustment, delay between stations, sensor programmability, total run time calculator, non water days
- Independent scheduling options
- Non-volatile memory
- Two levels of superior surge protection
- Three programs (A, B, C) with multiple start times
- Central control compatibility
Related Products
Icore Dual Hunter Decoder Control
Code : Icore-Dual
Hunter Industries I-CORE DUAL is Hunter’s innovative two-wire plug-in module for the I-Core controller. Designed to bring the convenience and efficiency of two-wire technology.The DUAL system can operate up to 48 zones via a single pair of wires, at distances up to 2.3 km. The 48 zones can all be installed on a single path, or divided over multiple paths to take advantage of pipe trenches. Dual decoders come in one and two-station versions.
- 4 Independent programs
- 8 Start times per program (A, B, C); 16 (D)
- Max. station run time: 12 hrs
- Easy Retrieve™ memory
- Compatible with Hunter Clik sensors and other micro-switch type weather sensors
435 Pump Start Relay
Code : 435-Pump-Start-Relay
Used for starting pumps via switching from a 24vac output irrigation controller.Automatically starts pump from output of controller,Lockable weather resistant case,Covered wiring compartment for protection,•Contact rating 2HP (1.5kw) at 240 volt,1 Phase, coil rating, 24VAC, 3VA,Double pole, single throw 20 amp
- Automatically starts pump from output of controller
- Lockable weather resistant case
- Covered wiring compartment for protection
Sterling Irrigation Controller
Code : SterlingXX
Sterling irrigation controllers provide an ideal solution for thecontrol of watering systems for golf courses, landscape urban areas, agricultural control andgerminationmisting systems. Available in 4, 8, 12, 18, 24, 30 and 36 stations.
- Six independent programs that can run concurrently.
- Up to 9 daily cycle starts per program; or, loop watering optional in all six programs for unlimited cycles.
- No limit on the number of programs to which a station can be assigned (all six if desired).
