- Dripper
Code : 5020
The 500 Pressure Regulator
Maintains the pressure at the emitter from rising, despite fluctuations or high pressure in the system.
- The same pressure regulator suits all emitters within the range of flow rates
- Operates at inlet pressure up to 450 kPa.
- Does not affect the uniform water distribution of the emitter attached
- Very low local head loss
- Wide water passage prevents clogging
- Made of tough durable plastis materials and stainless steel spring
- Modular, connects by “press-fit” design
Related Products
Antelco Mini Bubbler Adjust, Flow
Code : Antelco-Mini-Bubbler-360
Gentle umbrella pattern. Flow and coverage can be altered by rotating the cap.
Applications
Street trees and shrubs. Flow rates allow for short watering times.
- Finger-tip flow control with shut-off option
- Spike model to anchor Mini Bubbler at the plant
- Barb model for direct attachment to feeder and supply lines
- Threaded model for installation into Rigid Risers and Asta® Stakes
- 1/2” Threaded model for riser pipe installations
Ein-Dor Flow Regulated Mini Sprinkler
Code : 861-0XX-862-0XX
The 560 Agridor flow Regulator provides a constant flow rate at a wide range of inlet pressures. It is self-cleaning, has a large water passage and an internal filter to protect against clogging. It can be connected to mini sprinkler models 861, 862 sprayers specially designed for use with the flow regulator.
The flow regulator determines the flow rate, not the connected emitter which is always of a higher flow rate.
Applications
• Slopes and difficult topographic conditions
• In systems with fluctuating pressures
• In systems with longer laterals or smaller diameter pipes.
- Uniform flow rate regardless of inlet water pressure or topographical conditions
- Self flushing during irrigation
- Large water passage
- Includes an integral filter
- Operating pressure 150 - 400kPa
- Easy maintenance. Any clogging can be rinsed away with a water jet from the other side
Landscape Dripline 30xm x 2 lph Non PC
Code : HRDNPC
HR – LANDSCAPE DRIPLINE
Suitable for Lawns, shrubs, trees and flower beds. Best suited for level ground applications either on surface or under mulch
installations.
- Suitable for use with standard 13mm LD fittings
- Size 12.5mm ID and 14.5mm OD
- Brown UV protected tubing is durable under sunny conditions and blends with ground or mulch colours
- Dripline has dual outlet ports on each dripper to ensure that only one outlet has contact with the ground, eliminating a chance of back-siphoning debris into the tubing
- Round dripper with wide water passages which provides high resistance to blockages
- Self cleaning, water fl ow in dripper labyrinth fl ushes out sediments continuously
