- DC 9-12Volt- Domestic Controllers- Tap Timer-Tap Timer ControllersOur Products
Galcon 9001 Battery operated tap timer
Code : 9001D
Two watering stations from one tap – using ALTVALVE Easy to install and use Operated with 9v alkaline battery (not included) Run times from 1 minute – 12 hours Four start times per day Individual day programming Manual activation at controller Rain off suspension option Rain sensor override ready Low battery indicator Internal filter installed in controller
- Two watering stations from one tap - using ALTVALVE
- Easy to install and use
- Operated with 9v alkaline battery (not included)
Related Products
Solar Panel Node & XC Hybrid Controller
Code : SPNODE-SPXCH
Power Your XC Hybrid or Node Controller by Harnessing Solar Energy.
Hunter’s Solar Panel provides maintenance-free operation that harnesses the sun’s energy to power controllers 24 hours a day, 7 days a week for years on end. It is compatible with the XC Hybrid and Node controllers, which offer both on-the-wall and in-valve-box installation. Connecting the Solar Panel to either controller is an easy process that can be done quickly by any installer. Once connected, the Solar Panel supplies 100% of the controllers’ power, and eliminates the need for battery replacements. Since there are no batteries involved, there’s no need to worry about running out of power or scheduling replacement runs. So not only is the Solar Panel the most convenient solution for powering battery-operated controllers, it’s the most environmentally friendly as well.
- Add-On Accessory
- Maintenance-Free Operation
- Environmentally Friendly
- Fully Charged Out of the Box
Galcon DC series Battery operated control
Code : DC
Galcon DC series battery operated controllers, available in 1, 4, and 6 station models. Used where power is not available and designed foruse in all landscape and home watering systems. All DC series models are IP 68 rated allowing them to be buried below ground in valve box. Search DC-S for misting applications
- Independent programming of each valve (DC4)
- Weekly or cyclical programming
- Up to 4 cycle starts per day
Galcon Alt Valve
Code : ALTVALVE
The Galcon Alternator Valve allows irrigation of two zones using a Galcon 9001D.
Used also to convert existing single zone valve into two zones.
- Requires two cycle starts to switch between zones
- Minimum working pressure 100kPa
- Maximum working pressure 1013kPa
